X射线干涉光刻光束线关键光学元件热-结构耦合分析

为了保证上海光源X射线干涉光刻光束线的稳定性,减小热变形对实验结果的影响,对X射线干涉光刻光束线的3个关键光学元件——偏转镜、聚焦镜和精密四刀狭缝进行热-结构耦合分析。首先,计算偏转镜、聚焦镜和精密四刀狭缝所承载的功率密度;然后,建立其有限元模型;最后,获得光学元件的温度场和热变形的结果。结果表明,偏转镜和聚焦镜采用间接水冷方式可有效抑制热变形,冷却后的最大面形误差分别为7.2μrad和9.2μrad。精密四刀狭缝未冷却时,刀片组件温度介于271.56~273.27℃,刀口热变形为0.19 mm,直线导轨热变形为0.08 mm;经过铜辫子冷却后,刀片组件温度降至22.24~23.94℃,刀口热变形降至0.2μm,直线导轨热变形降至0.1μm;采用影像法和接触探头法测试后,刀口直线度、平行度和重复精度均满足技术要求。偏转镜、聚焦镜和精密四刀狭缝的热变形通过间接水冷和铜辫子的冷却方式可以得到很大程度的抑制,进而保证光斑质量。     

注采比对“二三结合”开发模式渗流特征的影响

大庆油田的开发逐渐进入高含水阶段,厚油层动用程度低,"二三结合"开发模式是有效的提高厚油层动用程度,改善水驱开发效果,提高油田采收率的有效手段。在"二三结合"开发模式注聚阶段中注采比对井间压力、含水饱和度等变化有重要影响。为了探究注采比对开发层位的井间压力及饱和度的影响,利用油藏数值模拟方法,模拟了相同的开发模式不同注采比的生产情况,绘制了不同注采比情况下,不同层位的井间压力及含水饱和度变化情况,为维持地层压力平衡,保持油田稳定生产提供有力的依据。     

塑料牙刷柄的傅立叶变换红外光谱分析

本文采用傅立叶变换光谱法对13种不同品牌的白色牙刷柄塑料进行了红外光谱分析,实验结果表明,依据红外光谱数据的异同,能够对不同品牌的牙刷柄样品进行鉴别。     

γ射线辐照和阳光照射对ZF6铅玻璃透光率的影响

通过实验研究ZF6铅玻璃在~(60)Co放射源相同剂量率不同累积剂量照射下透光率的变化规律。将辐照后的铅玻璃在室外阳光下、室内自然光下和不透光的抽屉中放置观察,发现阳光照射对铅玻璃辐照着色的恢复起着重要作用,在建立铅玻璃透光率随辐照时间变化的数学模型时,室内自然光对铅玻璃透光率的影响可忽略。实验数据验证了受辐照时铅玻璃透光率的变化与辐照时间符合指数函数关系。根据文献资料推导出铅玻璃透光率变化与光照时间为线性函数关系,但发现其与实验数据的符合程度较差,本文根据样条曲线插值法推导出铅玻璃透光率与光照时间为二次函数关系,与实验数据的符合效果较好。     

The analysis and comparison of two novel kinds of focusing elements as reflectors

In this article, two novel kinds of focusing elements as reflectors are analyzed and compared. One is the grooved Fresnel zone plate reflector with continuous phase‐correcting. The other called subzone paraboloid reflector, has the profile that consists of a series of paraboloids. Their diffraction efficiencies and bandwidths are described. The two elements still preserve the advantages of Fresnel zone plates, namely, low profile, high efficiency, and simple fabrication. Two dual‐reflector antennas using the proposed focusing elements as the main reflectors are simulated and the results show that these antennas have good radiation performances. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:101–108, 2015.     

Application of higher order spectral features and support vector machines for bearing faults classification

Condition monitoring and fault diagnosis of rolling element bearings timely and accurately are very important to ensure the reliability of rotating machinery. This paper presents a novel pattern classification approach for bearings diagnostics, which combines the higher order spectra analysis features and support vector machine classifier. The use of non-linear features motivated by the higher order spectra has been reported to be a promising approach to analyze the non-linear and non-Gaussian characteristics of the mechanical vibration signals. The vibration bi-spectrum (third order spectrum) patterns are extracted as the feature vectors presenting different bearing faults. The extracted bi-spectrum features are subjected to principal component analysis for dimensionality reduction. These principal components were fed to support vector machine to distinguish four kinds of bearing faults covering different levels of severity for each fault type, which were measured in the experimental test bench running under different working conditions. In order to find the optimal parameters for the multi-class support vector machine model, a grid-search method in combination with 10-fold cross-validation has been used. Based on the correct classification of bearing patterns in the test set, in each fold the performance measures are computed. The average of these performance measures is computed to report the overall performance of the support vector machine classifier. In addition, in fault detection problems, the performance of a detection algorithm usually depends on the trade-off between robustness and sensitivity. The sensitivity and robustness of the proposed method are explored by running a series of experiments. A receiver operating characteristic (ROC) curve made the results more convincing. The results indicated that the proposed method can reliably identify different fault patterns of rolling element bearings based on vibration signals.     

Rheological properties and gel characteristics of polysaccharides from fruit-bodies of Sparassis crispa

Rheological properties and gel characteristics of Sparassis crispa polysaccharides (SCPs) were investigated under various concentrations, temperature, pH, salt concentrations, and sucrose concentrations. SCP solutions behaved as shear thinning pseudoplastic fluids; apparent viscosity increased with concentrations but decreased with extreme conditions and was highest for 1% SCPs at 80 ℃ under neutral conditions; 5% SCPs solutions formed a hysteresis loop and exhibited thixotropic properties. By oscillatory measurements, SCPs were viscoelastic materials. 0.5% and 1% SCPs solutions exhibited viscous behavior at low frequency and enhanced elastic property with the oscillation frequency increased. With the concentration increased to 3% and 5%, the elastic property was predominant in solutions and exhibited gel-like behavior. SCPs gel textural properties and water holding capacity increased with concentration (to 20%) and decreased with salinity, extreme sucrose, and pH. 10% SCPs gels were optimized at 10% sucrose in neutral conditions. Thus, these results implied SCPs had the potential utilization as a new hydrocolloid source in food industries.     

Experimental investigation on bubble growth and detachment characteristics on vertical microelectrode surface under electrode-normal magnetic field in water electrolysis

The effects of current density and electrode-normal magnetic fields on the growth and detachment characteristics of a single bubble on vertical microelectrode surface have been investigated. A high-speed camera was used to capture the bubble evolution behavior and the bubble contact characteristic parameters were extracted and analyzed with OpenCV-Python program. The results reveal that an apparent bubble coalescence behavior occurs at low current densities and can be gradually inhibited with increasing current density. With the increase of current density, the bubble growth rate, departure diameter, working electrode potential and potential fluctuations increase, while the bubble growth time first increases and then decreases continuously. The upper microelectrode surface is more easily covered than the lower microelectrode surface. The whole microelectrode can be completely covered when the current density exceeds a certain limit with and without magnetic fields. The external magnetic fields can obviously promote the bubble detachment behavior within a relatively large current density range.